Sizzix Storage

Jay here...
It's taken years for me to learn, but when Paula says something like, "I don't have a place to keep the dies for the Vagabond machine all together."  The translation is, "can you build me some sort of shelves for them?"  Her collection really had outgrown its previous storage locations around the studio.  Since her Vagabond lives on a counter top in the studio where the basic Sizzix supplies are stored in the drawers below, this was the logical place for it.  Some quick measurements proved that shelves would fit perfectly behind the Vagabond.  The first step was to decide on what size to make it.  The width would be the same as the cabinet it would sit on and the height would be somewhere between 45"-47" depending on the how many shelves we put in.  Final dimensions are 311/2" x 48".  Now for the shelves.  Since the dies are 51/2" x 6", we settled on a depth of 61/4" and height of 6" between shelves.

Now it was off to Home Depot.  Here's what I bought:
           one 1"x 8" pine board, 8 feet long (for the two sides)
           four 1"x 8" pine boards, 6 feet long (the top, bottom and six shelves)
           (all of the other supplies I already had)

With lumber in hand, first step was to rip (trim the boards going with the grain) to the proper width (61/4") on the table saw.  This is always a fun way to make loads of saw dust.  The 8' board was cut in two pieces, 47" each (sides) and one of the 6' boards was cut in two pieces 311/2" each (the top & bottom).  At that point, I could have easily just grabbed some screws and done a layout of the pieces and screwed it all together.  Just about the time I start thinking that way the voice in my head says, "do it right or don't do it".  Sometimes that my grandpa's voice, but usually it's Paula's dad's voice.  Okay, then.  Dado joints and rabbet joints it would be.

So, with that motivation, I carefully measured and sketched the layout of the shelves on each of the sides with pencil.  I then used a Skilsaw to cut the outside edge of each dado joint that the shelf would fit in.  The final step was to use a router bit to trim out the rest of the joint making sure that the shelves would make a snug fit (see picture below).  I used a similar process on the top and bottom to make a rabbet joint for the sides.

Once the boards were cut, all of the pieces got a good sanding first with 100 grit sand paper and then with 220 grit.  Now, it was just a matter of fitting the pieces of the puzzle together.  To assemble,  I just needed some wood glue. I did use some finish nails to hold the top, bottom and sides together. 

Once the exterior was assembled, I made a final measurement between the dado joint on each side for the shelves.  They needed to fit in that dado joint and trimming the shelves to 305/8" long was a perfect fit.  Applying some wood glue to the joint and with a little coaxing by a rubber mallet, the shelves fit into place, no nails or screws needed.

Paula had decided she wanted it painted her current favorite color, Iced Spruce.  So, off we went to the hardware store to buy a quart of paint.  Benjamin Moore Paint doesn't call it Iced Spruce but I swear that's the color it is.  The Benjamin Moore color we used was 1565 Mount Saint Anne. 
After I painted it, Paula used her magic and sanded the edges, then rubbed on some brown paint to grunge it up a bit. 

 

Once painted and grunged, we put it in place and used a simple L bracket screwed into the top and the wall to keep it from tipping over.  That would not be a good thing.

 

Paula here.
First, thanks to my husband for building me such an awesome cabinet to store the dies.  When I started putting the dies in I realized it was going to hold WAY more dies than I thought.  Each shelf can hold about 40 Bigz dies (8 per stack).  So I had plenty of room to organize them!  I have Halloween on the top shelf.  Christmas on the second shelf and then alphabetically after that.   My Bigz XL dies are on the bottom shelf since they are the heaviest.  On the edge dies and Frameworks are on the shelf right above.  I still have plenty of room to grow the collection over time.

I also love the fact that I now have some room to display some of the cards I have created for blog tutorials.  I have never really had that kind of display space available in my small room.  So the space that used to be occupied by a rarely used bulletin board is being put to a much better use these days.  Cheers to that!

now carry on,
paula

Alice meets Downton Shadowbox

Back today with another one of my favorite CHA projects.  This one is a bit of fantasy after last weeks more personal piece.  The shadowbox is made with a 5.75 x 5.75" Configurations box with all but one of the small inner boxes removed.  The little girl is part of the Found Relatives pack.  Although, I did add vintage tatted lace across the front of her dress.
As I said in a previous post about Found relatives, I like to make up stories about the people.  Her story is that she wandered into a conservatory where specimens of exotic plants and other oddities are kept...hence the corked domes and low slung branch.  A little Alice in Wonderland meets Downton Abby I think.

 The box was painted with Iced Spruce and set aside to dry.

I cut manila cardstock using the new Frameworks die - Courtyard.  Then colored the cardstock using Distress Stains Frayed Burlap, Iced Spruce and Tattered Rose.

 I added a little Brushed Corduroy around the edges of the Frameworks with my Blending Tool.

Then added the Frameworks to the sides of the box with Muti-medium, including a layer over the top of the Frameworks to seal it.
Once dry, I used my fingers to add more Iced spruce and Walnut Stain Distress Paint over the top.

Wallflower paper from the 8 x 8 mini stash and Tissue Tape were added into the inside of the box with Multi-medium...with more paint over the top.  I love how the paper really looks like miniaturized chinoiserie wallpaper!

While that part was drying I worked on the Foundations feet using Iced Spruce Distress paint and Alcohol Ink in Pebble, as well as Mushroom.

For the Corked Domes, I added a butterfly from the Remnant Rubs Sheet to one and a metal flower stock to the other.  I painted the flower stock with Adirondack Dabber paint in Aqua and Citrus.

 A Clock Key was added to the top as well as a Word Band on the front.

More remnant rubs were added, as well as a stick from my neighbors tree, a vintage picture frame and vintage pearls.

I think the vintage picture frame really makes the piece.  Something I bought in a junk shop but not cheap by any means...think I paid $12-15 dollars for it since the case is leather and it did come with an old tintype.  I just removed the tintype and added a bit of map paper.
I also stamped the front edge with the Distress Damask stamp and Watering Can Archival Ink. Loving this combination.

Well, that's it for today...hope this shadowbox inspires some great creations this week!

Now carry on!

paula

InLinkz.com