Tuesday, March 23, 2021

The Liverpool Three

 Hello friends,

Thought I would share a fun project using another of the new Paper Dolls GROUPS.

As I thumbed though the pack of Backdrops 2, I spotted a vintage map of Liverpool.  I loved the colors of the orange and blue together and knew I had found the catalyst for the project.  Next I went to the bag of Paper Doll Groups and picked these three young men I could see working at the docks.  Of course here they are on their day off!  Well lets get started so I can explain more of the details!

I started with the small Vignette Tray as my substrate. It was the prefect size for the three young men.  I covered the outside of the tray, including the lip edge, with Backdrop paper that looks like an old piece of crackled wood.  On the inside, I added the Liverpool map making sure I centered the word, Liverpool, at the center top.  Once the tray was fully covered with paper, I painting a thin layer of Collage Medium over the top to seal the surface.

Backdrops are smaller than the paper we have produced in the past so I did not have enough of the crackle paper left to cover the entire back of the tray.  That was not a problem as I just chose a couple other papers from the pack to cover the back.  The Backdrops work together so seamlessly, crackle can go with typography which goes with pattern.  It's just that simple.
The next step is to add the shelf. I used one of the Eclectic Elements Pinked trim pieces since they can be easily cut to size with Tonic Scissors. I cut the trim piece and glued it into the tray with Collage Medium, leaving it to dry for while I worked on the Paper Dolls and some of the metals.  Once it was dry, I added a strip of the same crackle paper that I used on the outside of the tray.  I brushed Collage Medium over the top of the paper to seal so I could use my Walnut Stain Distress Crayon (with a damp paint brush) over the the surface - especially in the corners.  I also took a little bit of Speckled Egg Distress Paint on my finger tip and ran it along the pinked edge so the blue paint would skip along the surface.
You might be asking how I knew where to glue the shelf?  Well I placed the Tin Top (the thing with the star on the front) into the bottom of the tray.  I knew the shelf had to be just above the Tin Top - just that easy.
I wanted to add the wood Number Block 3 to the right side using the new Hook Clasp.  The Hook Clasp is the same one that I used as the closure on my Shrine project in my last post.  I added an eye screw to both the top of the Vignette Tray and the Wood Block. The eye screws are easy to twist into place if you start with a pilot hole made with an awl. 
I colored some string with Walnut Stain Distress Ink and dried it with my heat tool.  The string was looped through the eye screw then evened up.
I had previously glued a Hitch Fastener to the left side of the tray.  Once it is was secure, I was able to wrap the string around the Hitch Fastener and secure it with Collage Medium on the backside.  Once it's set, it's not going anywhere.
The new Paper Doll Groups have some wonderful characters to work with.  The three boys were colored with Distress Crayons.  I only colored one of boys suits - obviously it's the suit on the right.  I used the Chipped Sapphire Distress Crayon directly on the suit, then rubbed it with my finger till I could see the details of the coat.  The flowers were colored using a dry Water Brush (I like how the stiff bristles of the Water Brush move damp crayon onto the Paper Doll surface).  The Paper Doll Group was added to the tray with small wood blocks to give them the needed height over the string that runs behind them.
I grunged up some Mini Sprocket Gears with paint and Alcohol Ink and added them beneath the feet of the group. The string is just some cheesecloth I added to mimic straw.
For the bottom portion of the tray, I created a grungy bottle using Distress Crackle Paint Clear Rock Candy.  To do that, coat the Corked Vial with Collage Medium and let it dry.  Rub Distress Crackle Paint over the surface and let that dry.  Drip Mushroom Alcohol Ink over the Crackle Paint to color the bottle.
I also added Remnant Rub numbers to a Metallic Sticker and a bug to the tiny tag.
To complete the bottle, I rubbed some paint into the recessed portion of a Machinery Head and added it the top of the cork.
On the right side of the lower section, I added the Tin Top, Mini Flair and two of the new Industrial Gears. Both the Tin Top and the Industrial Gears have a wood block behind them for support. I used a small amount of shredded cheesecloth to disguise the wood block that sits right behind the center of the gears. I bet you can't even see it. I just glued the block in place, then added the gears with more Collage Medium to the Tin Top and wood block.  Once set, the Collage Medium holds everything like cement (those gears are not going anywhere).

I liked the idea of an industrial handle at the top of the tray.  I used paint and Alcohol ink, Distress Crayons to grunge up the handle and the added Hardware Heads.  Once glued with Collage Medium, I kept the tray in a standing position until it was set.
As you can see this tray is easy to create.  You just need to include some drying time to add the Hitch Fastener, the shelf and the Industrial Gears.  Other than that, it moves along quite easily.
Thanks for stopping by to read my post...I really appreciate it!

Now carry on,
paula


12 comments:

  1. Such a fabulous piece - I love the story telling within it... the map, the cogs and gears of the hard labour undertaken by the Liverpool Three. Adore the hanging 3 too! Brilliant as always.
    Alison x

    ReplyDelete
  2. Great piece, Paula! They for sure look like they are up for a pint and some shenanigans after a hard day of work!

    ReplyDelete
  3. Love the story you created here! Such fabulous details!

    ReplyDelete
  4. This is simply amazing. I am just purchasing items to start my own Tim Holtz projects. I am soooo excited. Is there a video that shows how to start from the beginning? Like what kind of glue do you use to hold items in place? Thank you so much for your help.

    ReplyDelete
    Replies
    1. I always use Collage Medium for every project. It is listed above and in every direction I write. I do not make videos - that's just not my jam.

      Delete
  5. Such a lot of creative ideas in one small box! Love it!

    ReplyDelete
  6. The story with this is in itself art. LOVE all the details you put into this. Just a WOW and WOW again.

    ReplyDelete