Layered Leaf Card

Hi everyone!
I'm back today with a project celebrating the release of the much anticipated Layered Leaf Bigz die and texture fade from Sizzix.  I have been waiting for this set to arrive so I could test it out.  I will tell you, it did not disappoint!  Follow along and I will show you what I did...

To start, you will need a piece of Distress Watercolor paper.  The pack comes with twenty - 4 1/4 x 5 1/2" pieces which will work for our leaf.  Cut the watercolor paper to 4 x 5 1/2".

I am using Distress Stain to color the Watercolor cardstock - Gathered Twigs, Crushed Olive, Ripe Persimmon, and Evergreen bough.  Just a little of each onto the Craft Sheet.  Remember, the colors are next to each other on the Craft Sheet, not on top of each other.  Spray stain with water.

Smoosh (is that a real word?) the card down into the stain and pick it right back up again.  Move to a paper towel to dry.  The card does not have to be completely dry before you go back into the stain gathering small droplets. 

Repeat 4 or 5 times until the card has layers of color, then dry completely.

Once it is dry, run the card through the Vagabond/Big Shot machine to die cut the Layered Leaf shape.  It really is beautiful with all the different layered colors of Distress Stain.  That little hint of Evergreen bough is my favorite part.
So I bet you're thinking, what she gonna do with that leaf?
nothing.
really, truthfully, nothing.

After I cut the leaf I was rather enamored with this...
the leftover shape or negative image or the leaf.
So I set the leaf aside for another day and went to work on the idea in my head (I get those every once in a while).

I cut a piece of Specialty Stamping paper 4 1/4 x 5 3/4" and centered it in the Texture Fade that comes with the Layered Leaf set.

Note: I used 12 x 12" Specialty Stamping Paper to cut my own paper, as the pre-cut sheets are only 4 1/4 x 5 1/2".  Yep, only 1/8" shy of what I wanted.  Yes, I probably could have adapted the idea if I only owned the smaller size, but since I had one package of the 12 x 12" I used it and cut the size I envisioned.

This is what it looked like when the paper was removed from the texture fade....even better than I imagined.

I got out the Gold Alcohol Ink and a Blending Tool with felt on the pad.  Little by little I added the gold over the entire card.

Until it looked like this.

Another layer of Alcohol ink in Slate to add more depth.  I had a few ideas on how to use just this piece so I may have to revisit this again in the future.

Now back to the watercolor paper - I flipped it over onto the Craft Sheet and added a nice coating of Multi Medium over the back of the heavy card.  I brushed the glue towards the center of the leaf so the Multi Medium did not get under the cut shape (remember to work quick!).

Then added it to the Alcohol Inked leaf.  Press down so that all the leaf pieces stay put.  As you can see the watercolor paper is just shy of the base piece...just what I wanted, a really nice gold border going all the way around the card front.

Next up, the sewing machine.  I ran a long double stitch around the card front with brown thread.  Once it was stitched in place, I went around the card with my fingernail pulling up the small edge on the outside of the stitching...lifting, bending, and sometimes even tearing the thick watercolor paper.  If a little too much white began to show I just added a bit of Distress Ink to the edge.

I cut a brown Core'dinations Kraft Core base for my card front and used a tape runner to adhere the leaf to the cardstock.  I also used a craft knife to cut a small slit into the folded edge for some Jute String.

Thread 24" of Jute String into the right side of a Word Band.  Pull through till the ends are even.

Then wrap around the card front, pulling the two cut ends through the slit in the side of the card.

Tie through the left side of the Word Band.

And there you go.
Super simple.
Absolutely L.O.V.E. this Layered Leaf die/texture fade!
I realize the expectation is that the leaf would have all the mottled color, but in this case the gold is a great foil to the bold color of the stains.  It is hard to see how wonderful that gold Alcohol Ink looks in a photo though!

I know I will be trying out this same technique with the Layered Butterfly as soon as possible!

Loving everything about this quick card since it looks like it took way longer than it did.  I'm also looking forward to next week when I have some time to tackle the leaf I didn't use today.   The Layered Leaf die just moved to the top of my favorites list!

Hope everyone has a great weekend and that it involves a little bit of crafting and spending time with people you love. 
now carry on,
paula
UPDATE: the Layered Leaf die is available NOW at Simon Says Stamp!

InLinkz.com

Holly Bough Stencil take two

Another tag today using the new Holly Bough Stencil...I mean I couldn't stop at only one.  This time I'm using a #8 tag.
Color the tag with Festive Berries Distress Stain by adding the stain to a craft mat then spritzing some water onto the stain.

 Lay the tag into the mix for the initial coating.

 Then dry with a heat tool, going back into the stain numerous times to build up the layers of red.

 Pounce a little Distress Paint in Tarnished Brass onto the craft sheet.

Using the Blending tool and a foam pad, add the paint over the Holly Bough Stencil pattern.  Work quickly and wash the stencil immediately.

Lift stencil to reveal the golden holly...a very subtle glow.

A sentiment from the Deco Christmas set works great since it runs down the side of the tag leaving room to add more embellishment.

I painted a piece of Grungeboard in black, then used the Vagabond to cut the Victorian Carolers die. The die has a man and lady but I'm just using the man playing the violin today.

Add him to the tag.

 Then a Seasonal Word band tied with red and cream Trimmings.

 I added a small pieces of Wonder tape (1/8" wide) to his hat.

 Then sprinkled a very small amount of Distress Glitter over the Wonder Tape.

 I pressed it into the tape then dusted off the excess.

Hand cut a piece of holly then add a dot of Cranberry Dimensional Pearls for the berry.

Once dry, I added music from the Christmas Remnant Rubs.  Each package comes with a sheet of black and a sheet of white.  The white is perfect over the black paint surface.  A little Distress ink to knock back the white color just a bit, and we're done.

Well, it's back to working on cutting, mailing, planning, creating, gathering and garage sale shopping (all code for top secret CHA stuff).  Can't wait for the reveal in just a few short weeks.  I mean who knows what I will find on the side of the road this year?

carry on,
paula

InLinkz.com