Palette Neutral Wall Pocket

Hello friends,

I'm so thrilled to finally share a project I've been working on – a wall pocket with a vintage-inspired twist! The idea sparked when I saw the beautiful Neutral Palette fabric. I knew its subtle elegance would be the perfect backdrop to complement my love for all things vintage.

More than just a practical storage solution, this wall pocket has become a little piece of inspiration for me. It's designed to hold some of the things I reach for constantly. But what truly makes it special are the details – the old string, the hanging lace and ribbon, and the charming vintage buttons. Every time I glance at it, I'm reminded of the beauty in these simple, time-worn elements. It's amazing how fabric and a few found objects can create something so inspiring!   

The finished size of the wall pocket is approximately 17 x 13", but honestly you can make it whatever size fits your space.

Here are my fabric choices but any combination will work. My front and back are the same, but even that is flexible. 

Palette Neutral Wallpaper - front and back (cut 18 x 14")

Palette Neutral Stamps - pocket 1 - cut one 14 x 6"

Palette Neutral Map - pocket 2 - cut one 14 x 6"

Palette Neutral Gears - pocket 3 - cut one 14 x 6"

Palette Neutral Wood - binding - cut two 3" x 44" strips 

Palette Neutral Collage - patch

cotton batting - cut one cut 18 x 14" and three 14 x 2 1/2" 

Cut two pieces of fabric + cotton batting - 18 x 14". I always cut the backing pieces a little larger than the finished size so the panel can be squared up after quilting.

Use a Friction pen to mark the stitching lines. The pattern does not matter. 

To start, I drew a line every 1" from top to bottom. 

Once I sewed all the 1" lines, I went back and sewed additional lines using the stitched lines as my guide. 

I love the outcome. 

(there are no pen marks on the fabric because I have already ironed over the top to make the pen lines disappear).

Cut three strips of fabric for the pockets - all are 14 x 6".

Iron in half so they are now 14 x 3"

Open up and add a strip of cotton batting. The batting is cut 1/2" short so when you sew, you are only sewing through fabric, not batting. That will allow you to fold the pocket up into place without folding the thick batting.

Fold back down and now you are ready to sew.

Make marks with the pen starting at 5", then 10", then 15" from the top.

Pin the strips to the backing (raw edges facing up) so the top of each strip matches the pen marks.

Sew each strip to the backing.

Then iron the strips forward creating a pocket with each strip.

Back to the cutting table so you can square up before stitching the pockets.

This is a part where you need to decide what you will use the wall pocket for. I got out the tags, ephemera, really anything that needed a special size pocket. I laid everything out so I could determine how small or large the pockets needed to be. Once I marked my pocket stitching lines with pins (just through the pocket layer), I added the things that needed to be sewn on before sewing the pockets down. Any ephemera was added first with a glue stick.

Then stitching. Both of these pieces came from the Layers Remnants pack. 

And because the pocket are still free to move back and forth, it was easy to add any machine or hand sewing.

Next, I added some "patches" from the Neutral Collage fabric. Again, I used the glue stick first, then went to the sewing machine.

I also added the Word Plaque with Button and Carpet thread (thick thread).

Run a basting stitch (that just means a long stitch length or big stitch) along each side of the panel stitching the pockets into place. *Do not skip this step. It is so much easier to add the binding if you know your pockets are flat and in the correct position.

Now add the back. I used a Quilt Basting Spray to secure the fabric to the batting before sewing the binding on.

I picked Palette Neutral Wood for my binding. You will need two 3 x 44" strips sew together to get a strip long enough to go all the way around the panel. Once your pieces are stitched together, iron strip in half so you have a very long 1 1/2" strip of binding.

I'm not going to explain here how to sew the binding on because I am just not that good of a technical writer. There are a million YouTube videos that will show you how to do it (I'm also a visual learner so I need someone to show me, rather than reading how to do it). I suggest this video, "Brilliant Machine Binding Method", because the lady is very calm and explains it well. She shows you four times how to turn the corner, using a simple trick that works every time. When I first wanted to learn the corner trick I made a 10 x 10" quilted panel and used that to practice turning the corners. I also have her video saved on YouTube, so every time I need to do binding I can pop right over and see her do it once or twice then I'm good to go.

I added grommets at the top for hanging. You might think it scary to add grommets (giant eyelets) but it is actually very easy. I bought my package at Hobby Lobby. It was $1.99 and it came with the tool that you need to set the grommet. You will need to cut a small hole in your project (that might be the only scary part) and you will need a small hammer to pound the two pieces of the grommet together using the tool. There are enough grommets in the package to be able to try one on a scrap piece of fabric/batting just so you can see how easy it is.

And there you go. Wall pocket is done. 

Now the best part...you get to fill it up!

top right

Ephemera, vintage buttons, metallic string in the pockets. 

Dyed ribbon and vintage lace hung from Loop Pins.

top left

More ephemera and vintage lace, #8 tags in the middle pocket on their side.

bottom left

Montage Collage Frames, hand dyed string, and #5 Mixed Media tags.

bottom right

Salvaged Tags and #5 Mixed Media tags.

I hope you love this as much as I do! I just love the Neutral Palette for this project. It brings out the best of all the vintage things I have added.

Now carry on,

paula

Springtime Vignette

Hello friends,

With Easter right around the corner, I thought it was time for a little springtime project that could easily be completed in a day or two. I covered the boxes on day one. Along with painting the rabbit, eggs and Toadstools so they could dry overnight. Day two was putting the scene together and cutting the Sizzix flowers. I hope you'll follow the following easy steps to create your own little springtime garden scene!

I started with two Square Vignette Boxes (I did not use the smallest box that comes with the set). I cut 4 patterns of Worn Wallpaper to cover the two boxes, then adhered the paper with Collage Medium.

Once the paper was adhered I covered the surface with a thin layer of Collage Medium and set the boxes aside to dry while I worked on other things.

Lets start with the things that need to be painted so they can start drying. 

I used hot glue to add a Salvaged Rabbit to a big popsicle stick for easy painting. I used Ground Espresso Distress Paint for the rabbit, but any color will work. I gave him two coats for good measure.

After he was dry, I sanded off the shine with steel wool. Now you can pop him off the popsicle stick.

Next up are the Tiny Eggs. I really didn't know what color I wanted so I painted up a few of each using Speckled Egg, Squeezed Lemonade, Dried Marigold, and Worn Lipstick. I just used my fingers, wiping my hands between colors. I also painted, or should I say rubbed, Scorched Timber over the entire Barrel.

Once the eggs were dry, I flicked paint over the top with a small paintbrush. 

While the eggs dry, I painted two Toadstools with Speckled Egg Distress Paint. It took two coats over the tops to get full coverage. Once dry, scribble Walnut Stain Crayon over the paint and rub it in. I also used a wet wipe to pounce over any dark spots. I love the way they turned out with such little effort.

NOTE: you can see how I added a chipboard base to each Toadstool so it will be easy to secure them to the Vignette base when the time comes. A little hot glue works perfectly to secure the chipboard to the Toadstool - you just need to hold it upright while the hot glue cools.

I thought this metal plaque from the Factory Tags pack would work brilliantly on one of the Vignette Boxes. I just needed to add a bit of Picket Fence Crayon to fill in the recessed areas and a couple of the smallest Screw Heads.

One more thing before we start assembling...a sentiment. This time I took a stick and wrapped cardstock around the top with a Metallic Sticker. The bottom got the same treatment as the Toadstools so I can adhere it to the Vignette Box with ease.

Lets add some reindeer moss around the bottom just to get started.

Now we need the boxes that we made earlier. I used a Walnut Stain Distress Crayon to age the Wallpaper, because that is just my style. You know I like things to look a bit beaten up, lol. 

So here we go...lets start gluing the mail things to the smaller of the Vignette Boxes. I took this shot so you could see approximately where I placed things. 

NOTE: I previously added the Metal Factory Tag to the center front when the Vignette could be on it's side. You can also use 1/2" Scor-tape to add the tag if you don't want to wait the drying time. There is also a much better photo of the tag at the end of the tutorial.

Once the main pieces had some time to dry, I added more moss...both reindeer moss and spanish moss.

Now for the last go round...

I started at the back to fill in more of the space. I added some spanish moss and after it was dry, I pulled apart small pieces of moss and tucked it inside the spanish moss. The flowers and rocks were added last.

NOTE: the tiny rocks were found at Michaels, but I think any craft store would have them in the flower arranging section or even in miniatures.

All the flowers were made with the Sizzix Brushstroke Flowers Mini Thinlit.

I did not end up using any of the pink eggs - they just stood out too much. 

So easy to tuck the Tiny Eggs into any little spot! The detail work is my favorite part!

Now add the two Vignette together with Collage Medium. 

And there you go! 

I enjoyed making this project with all the pastel colors and nods to springtime. I also love how even mixing the Worn Wallpaper works perfectly with this color palette. Ready for Spring!

Now carry on,

Paula